Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.educacionsuperior.gob.ec/handle/28000/2600
metadata.dc.type: article
Título : Air jet spray of nylon 6 membrane structures for bone tissue engineering
Autor : Abdal-hay, Abdalla
Palabras clave : AIR JET SPRAY;BONE TISSUE ENGINEERING;ELECTROSPINNING;BIOMATERIALS
Fecha de publicación : 2014
Citación : Abdal-hay, Abdalla; Vanegas, Pablo; Lim, Jae Kyoo. (2014). Air jet spray of nylon 6 membrane structures for bone tissue engineering. Materials Letters. Vol. 125. pp. 51–55.
Resumen : A novel porous nylon 6 (N6) scaffold with high and low porosity was designed using a facile, one-step approach. The scaffold samples were prepared using air jet spray (AJS) to obtain high production rates as an alternative low cost, effective technique with precise thickness control. The present results show that AJS adequately produced interconnected porous networks ranging from micron to submicron scales that were observed using a scanning electron microscope. The effect of AJS on the secondary structure of N6 was examined to identify and quantify conformational changes that occurred due to processing. The mechanical properties of the fabricated samples were tested. The results of tensile tests indicated higher tensile strength of AJS scaffold than that of electrospun scaffold.
metadata.dc.description.sponsorship: Universidad De Cuenca
metadata.dc.description.uri: http://www.sciencedirect.com/science/article/pii/S0167577X14004960
URI : http://repositorio.educacionsuperior.gob.ec/handle/28000/2600
ISSN : 0167-577X
Aparece en las colecciones: Proyecto Prometeo

Ficheros en este ítem:
No hay ficheros asociados a este ítem.


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.